Barely twelve months passed between the order confirmation to AGO AG until the implementation of the new Energy Center II in Dresden. This is a record-breaking time considering that all tender procedures and construction designs for the project in the value of 22 million€ as well as all installation work was carried out.
Hot water heating facility with thermal power station and heat exchangers operated by natural gas and heated with 10 bar saturated steam from gas engines and steam boilers.
Technical data:
- Maximum allowable operating pressure: 16 bar
- Heat network: 32°C and 54°C
- 9 gas engines with 2,560 kW each = 23.0 MW / hot water
- 3 heat exchangers with 5,000 kW each = 15.0 MW / hot water
- Refrigeration for a chip factory
- Cold water temperature 5°C and 11°C
- 5 turbo chillers with 5,900 kW each = 29.5 MW
- 3 double effect absorption chillers 5,800 kW each = 17.4 MW
- 2 single effect absorption chillers 3,200 kW each = 6.4 MW
- Heat recovery from cooling water at 24.0 MW
- 14 cooling towers with 6.5 MW each = 91.0 MW
- Design: AGO
Similar projects
08.12.202008:58:24
Projects
Hotel building over 14 floors with guest rooms, a conference floor and a technical floor. Installation of ventilation, heating, refrigeration and sanitary facilities including heat recoveries and fire protection equipment.
07.12.202016:16:31
Projects
In order to increase the security of supply of the district heating system, the heating plant was extended by installing of two identical, natural gas-fired hot water boilers with a total thermal output of about 16.8 MW inside a new building. Also included in the scope of supply were the necessary connections to the existing systems of the heat plant such as heating water flow/return flow, gas supply and drinking water.
07.12.202014:44:18
Projects
The order covers the implementation planning, installation, startup incl. test run for the CHP plant in Wunsiedel. The main components of this plant are: combustion chamber, thermal oil boiler, ORC turbine, wood chip dryer, electro technology and process control system.
26.11.202011:51:13
Projects
The new combined heat and power plant supplies the city consisting of 100,000 residents with power and hot water. A Greek company designed the building and the boiler plant, currently with 75 MW (final stage approximately 115 MW). AGO installed the complete gas engine plant with Deutz engines, including the entire electrical engineering, medium voltage system, and SCADA system.